新一代葫芦

稳健性、性能和可靠性。

GH 葫芦系列的设计，基于可靠性、安全性、耐用性、优惠价格、易于维护以及可用性等原则。

GH 葫芦采用最先进的设计技术制造。其制造采用最先进的生产手段和适当的组织结构。GH 钢丝绳葫芦适用于桥式起重机、龙门和半龙门起重机、单梁和双梁起重机以及其他类型的应用。起重能力从 800 千克到 120 吨，有脚踏式、单梁式和双梁式。该系列葫芦结构坚固紧凑、模块化设计、易于维护，钢丝绳落差各不相同，可根据每小时起吊次数和起吊载荷的工作周期等要求，提供多种不同的吊钩轨迹、起吊速度和 FEM/ ISO 工作组。GH 葫芦将控制系统和安全操作期监控作为标准配置。

GHE17

GHE17 的设计和制造，基于我们新一代葫芦所采用的模块化概念，融合了使该系列葫芦成为坚固、性能和可靠性代名词的所有特性。

全系列产品均可选配离心式制动器。

Lorem ipsum dolor sit amet, consectetur adipiscing elit.Pellentesque ullamcorper maximus convallis.Ut odio nulla, rutrum sit amet diam vitae, semper molestie turpis.Morbi interdum massa non nibh iaculis porta.

全新设计的齿轮电机。

满足最高的市场需求。整个系列的工作级别均为 M5 或更高。齿轮经过硬化和磨削处理，更加耐用，运行更加平稳。

配备变频驱动，超速 30%。

新型提升电机与变频驱动装置配合使用，可提高生产率，同时延长机械装置的使用寿命。负荷越小，转速越高。

管状双梁。

更大的吊钩行程和新的 2,100 mm 小车跨度。我们提供的解决方案在市面上独一无二，极具竞争力。

智能葫芦。

新款 GHE17 与我们的 COREBOX 相结合：互联智能系统以节省成本并提高生产力。

辅助安全制动器。

经济高效的解决方案，适用于所有产品系列。离心式制动器可在发生失控时逐步停止载荷。

降低高度可达 20 吨。

平衡且紧凑的解决方案，利用张力滚轮避免使用配重，，减少了结构中的反作用力。

GHA12

GHB11

GHD13

最先进葫芦的特点。

现代设计

Design	Robust, compact and clean with a modern and technological profile.
No counterweights	Lighter and with the most economic structure.
Modular design	Changing just a few of the parts allows the hoist configuration to be transformed.
Bolted structure	The maintenance is simpler and avoids the deformation of the welded frame, achieving greater versatility.
Exterior fairing	With a common plate for the entire range of each generation.
Compact tubular double girder concept	More competitive solution than the typical trolley with end carriage on the market. Exclusive to GH.

耐用部件

Gears made of rectified cemented material:	This lengthens the life of the gearbox, manufactured according to ISO 6336. Reduces vibrations and noise of the gearbox.
Protection of travel gear in suspended low headroom:	Avoids handling and possible entrapment. Prevents the dripping of grease.
Four-gauge pin type load cell:	For load limiter, which makes it possible to know the load spectrum and determine the SWP.
Steel wire rope, with coated steel core and safety factor greater than 5 in all configurations.
Quick connectors which facilitate maintenance and save assembly time.
Top of the range commercial electrical components:	Schneider, Weidmüller, etc.

增强安全性

Standardisation of variable speed drive for all movements.
Increased safety:	By placing the encoder in lifting that favours the return of the command information from the drive to the motor. Robust and high-resolution design encoder.
High-capacity braking resistance, overload capacity, oversized. High dielectric strength.
Overspeed for small loads:	Allows the hoist to go faster if the load is below 25%. With the maximum load it can go at nominal speed. From 25% to 60% maximum overspeed.
Possibility of fitting regenerative drive and the elimination of braking resistors. Energy savings.	With a common plate for the entire range of each generation.

正在寻求超越您期许的公司和解决方案？

询价